Samsung Washer Error Codes: What They Mean and What to Do

Find your Samsung error code, try the first fix, and know when to call a technician in Hattiesburg, MS.

Short answer

Most Samsung washer codes point to a simple cause: a closed water valve, a kinked hose, a clogged filter or an uneven load. Find your code in the table below, try the first fix, and call us if it comes back.

Start here: reset the washer

Turn the washer off, unplug it for 2 to 3 minutes, plug it back in and restart the cycle. Some codes clear this way. The same code can also mean different things on different models: dC and 3E are the two to watch, so check your manual if the table gives two meanings. Many Samsung washers show the same code with an E or a C at the end, for example 4E or 4C. They mean the same thing.

Samsung washer error codes and what to do

CodeWhat it meansTry this firstCall a technician if
4C, 4E, nF, 1 4CNot filling with waterOpen both water valves fully, straighten the hoses, clean the inlet filters, restartThe code returns
4C2, 4E2, CE, nF1, 14C2Hot and cold hoses swappedReconnect them: cold to the cold inlet, hot to the hot inlet (usually blue and red)Not needed, this is a hose fix
5C, 5E, SC, SE, nd, 1 5CNot drainingCheck the drain hose for kinks, clear the drain pump filter, restartIt still won’t drain after the filter and hose are clear
OE, 0E, OC, 0COverflow, too much waterTurn the washer off, let it drain, restartWater rises past normal again
1E, LE, 1C, LC, LC1Water level sensor or a leakLook for leaks, check the hoses, run an empty cycle with no detergent to check for sudsThe code stays
UE, Ub, U6, dC*Unbalanced loadSpread out and untangle the laundry, close the door, restart. Ur is the washer rebalancing itself, not a faultIt repeats even with small, even loads
dE, dS, d5, FL, LO, dC*Door not locked or closedCheck the latch, remove anything caught in the door, close it firmlyThe door or latch is damaged
SUd, SUdS, 5UDToo many sudsUse less, high-efficiency detergent. The washer pauses and resumesNot needed
3E, 3C, E3Motor error (a voltage error on some models)Power off for 2 to 3 minutes, restart the cycleThe error continues
8E, BEVibration or MEMS sensorSame power-off resetThe error continues
9E1, 9E2, PF, UCPower supply (voltage)Plug the washer into its own outlet with no extension cordThe code continues
E2, bE2Stuck panel buttonPower off, then press each button on its ownA button is damaged or the code returns
Cb, C6Calibration modeRun it with the washer empty. It stops after 1 to 3 minutesNot an error

*On some models dC is a door error and on others an unbalanced-load error, and 3E can be a voltage error instead of a motor error. Check your manual.

When to call us

If your code keeps coming back after the first fix, or you see more than one code in a short time, it’s time for a professional. Don’t open the cabinet or touch the wiring yourself. We come to your home in Hattiesburg and nearby towns, give you a written price first, and back the repair with a 30-day warranty.

Related problems

See our Samsung washer repair page, the full washer error code guide, and guides for a washer that won’t drain, won’t fill or is overflowing. To clear a drain error yourself, read how to clean the drain pump filter.

Codes and first steps checked against Samsung’s US washer error code guide.

FAQ

Samsung washer error code questions, answered

Can I keep using my Samsung washer with an error code showing?

If the code clears after a restart and doesn’t return, yes. If it keeps coming back, or water is leaking or overflowing, stop using it and call us.

Why does my washer show an E code on one screen and a C code on another?

Samsung shows the same fault as 4E or 4C, 5E or 5C, depending on the model. They mean the same thing.

What does it cost to fix?

Our service call is $75, and you get a written price before any work starts. See the washer repair cost guide.

Samsung washer showing an error? We’ll sort it out.

Call (601) 419-6599 for a written price before any work starts. 2624 Lincoln Rd, Hattiesburg, MS 39402. Monday to Saturday, 8 a.m. to 6 p.m. Request service for your Samsung washer today.