Washer Error Codes: What They Mean and What to Do
Samsung, LG, Whirlpool and Maytag codes in plain English, plus what to try first.
Most washer error codes point to one of four things: a drain problem, a door or lid problem, a water-fill problem or an unbalanced load. Check the drain filter and hose, the door, the water taps and the load first. If the code returns, call us. Codes vary by model, so use your manual to confirm.
What do washer error codes mean?
An error code is the washer telling you which system failed a check. The codes below are common, but they vary by model, so use them as a starting point.
Samsung error codes
| Code | Usually means | First check |
|---|---|---|
| 5E, SE, nF | Cannot drain | Pump filter and drain hose |
| dE, dC, DC | Door not latched or locked | Door and latch |
| UE, UB | Unbalanced load | Level and load size |
| 4E, 4C, LE | Water not filling | Taps and inlet screens |
| 3E, 3C | Motor trouble | Call for a diagnosis |
Full detail on our Samsung washer repair page.
LG error codes
| Code | Usually means | First check |
|---|---|---|
| OE | Cannot drain | Pump filter and drain hose |
| dE, dE1 | Door not closed or locked | Door and latch |
| IE | Not enough water coming in | Taps and inlet screens |
| UE | Unbalanced load | Level and load size |
| LE | Motor problem | Call for a diagnosis |
| FE | Too much water | Call for a diagnosis |
| CL | Child lock on | Hold the lock button per your manual |
Full detail on our LG washer repair page.
Whirlpool and Maytag error codes
| Code | Usually means | First check |
|---|---|---|
| F9 E1 | Takes too long to drain | Drain hose and pump filter |
| F8 E1 | Takes too long to fill | Taps and inlet screens |
| F5 codes | Door or lid lock problem | Door or lid and latch |
Full detail on our Whirlpool and Maytag page.
What should I do first when a code appears?
- Write down the code and the model number.
- Unplug the washer for a few minutes, then plug it back in. This clears some glitches.
- Check the basics: taps open, hoses not kinked, door closed, load balanced.
- On a drain code, clear the pump filter. Put a towel and shallow pan down first.
- If the code returns, stop and call us. Repeating a failed cycle can make things worse.
When do I need a technician?
If the code returns after the basics, or the washer leaks, smokes, smells hot or trips the breaker, call us. Motor, control board and sensor codes need testing with tools. See washer won’t drain and repair costs.
Why a code can come back after a reset
A reset clears a temporary glitch, but it does not fix a worn part. If a drain code returns, the pump or hose is the real fault. If a door code returns, the latch or lock has failed. If a fill code returns, a tap, screen or valve is the issue. Repeating cycles wastes water and can damage parts, so stop after the second try and call us. Our FAQ covers more.
Keep a record
Write down the model number, the code and what the washer was doing. A photo of the display helps. Share it when you contact us and we can often name the likely part before we arrive.
Codes and the problems behind them
A code is only the start. A drain code leads to the washer won’t drain checks. A door code usually points to the lock on a front-loader. A fill code can be a closed tap or sediment, especially on well water. A balance code on a top-loader often means a worn suspension or an unlevel floor.
A real example: when a code is really a door-lock fault
A Hattiesburg customer’s front-loader would not respond or start. We checked the power, cord and connections, then the door lock, and found a faulty assembly. After replacing it and testing the lock, the washer ran a full cycle. See Samsung and LG for brand detail, and Whirlpool and Maytag for F codes.
What to do next
Read the FAQ, check the cost page, see where we work and contact us. Leaks and codes together? See washer leaking water.
Have a Samsung washer? See the dedicated guide to Samsung washer error codes, with what each one means and what to try first.
Using an LG washer? See our LG washer error codes guide.
Error code questions, answered
What does 5E mean on a Samsung washer?
5E means the washer cannot drain. Check the pump filter and drain hose first.
What does OE mean on an LG washer?
OE means the washer is not draining. Check the filter, hose and standpipe.
What does UE mean on a washer?
UE means the load is unbalanced. Rearrange the load and make sure the washer is level.
What does F9 E1 mean on a Whirlpool?
It usually means the washer took too long to drain. Check the hose and filter.
Can I reset a washer to clear a code?
Unplug it for a few minutes and run a drain and spin cycle. If the code comes back, the fault is real and needs a repair.
Do all washers use the same codes?
No. Codes differ by brand and model. Check your manual or tell us the model number.
Code won’t clear? Call us.
Call (601) 419-6599. 2624 Lincoln Rd, Hattiesburg, MS 39402. Monday to Saturday, 8 a.m. to 6 p.m. Request service for washer error codes today.