LG Washer Error Codes: What They Mean and How to Fix Them
Find your LG error code, try the first fix, and know when to call a technician in Hattiesburg, MS.
Most LG washer codes point to a simple cause: a closed tap, a kinked hose, a clogged filter or an uneven load. Find your code in the table below, try the first fix, and call us if it comes back.
Start here: reset the washer
Turn the washer off, unplug it (or trip its breaker) for 10 seconds, plug it back in, close the door or lid firmly and press Start/Pause. Many LG codes are temporary and clear this way. Codes can differ between front-load and top-load models, so check your manual if a fix does not match.
LG washer error codes and what to do
| Code | What it means | Try this first | Call a technician if |
|---|---|---|---|
| IE | Not enough water coming in | Open both taps fully, straighten kinked hoses, clean the inlet screens, check water pressure | The code returns |
| OE | Water will not drain | Straighten or clear the drain hose and clean the drain pump filter | The code returns or the drum stays full |
| UE | Unbalanced load | Redistribute the clothes, add a few similar items to a small load, close the door and press Start/Pause | It keeps happening with a normal load |
| dE, dE1, dE2 | Door or lid will not lock | Clear anything blocking the door or lid, unplug for 10 seconds, close firmly and restart | The door still will not lock |
| LE | Motor locked or overloaded | Let the washer rest about 30 minutes, reduce the load and restart | The code returns |
| FE | Overfilling, often a faulty water valve | Close both taps, drain the water and restart | The code returns, since a bad valve needs replacing |
| PF | Power failed during the cycle | Unplug for a few seconds, restore power and restart the cycle | It happens repeatedly |
| PE | Water level sensor problem | Unplug for 10 seconds and restart | The code returns |
| tE | Heating or thermistor error | Unplug for 10 seconds, drain and restart | The code returns |
| CE | Motor over-current | Unplug for 10 seconds and retry | The code persists. Shut off the water first |
| E6 (top-load) | Clutch problem, often a coin stuck between the pulsator and tub | Empty the tub and check for a trapped coin or object | No object is found |
| FF | Frozen hoses or pump | Thaw the hoses and drain filter with warm water | Water still will not move |
| sUD | Too many suds | Use less detergent. The washer runs a suds-reducing cycle that adds time | It happens with the right amount of detergent |
| tCL | Tub clean reminder, not a fault | Run a tub clean cycle with washer cleaner | Not needed |
CL (child lock) and Cd (cool down) are status messages, not errors. DR means the washer is draining on its own after sitting idle.
When to call us
Call if a code returns after a reset, if you see FE, LE, CE, tE or PE more than once, or if the washer leaks, smells burnt or trips the breaker. We serve Hattiesburg, Petal, Purvis and nearby areas. Call (601) 419-6599, Monday to Saturday, 8am to 6pm.
Related problems
See our LG washer repair page, the full washer error codes guide, Samsung error codes, or help with a washer that won’t drain or won’t fill.
Codes and first steps checked against LG’s US support pages, including the LG washer error code list. Codes vary by model.
LG washer error code questions, answered
What does IE mean on an LG washer?
The washer is not getting enough water. Check that both taps are fully open, the hoses are not kinked, the inlet screens are clean and the water pressure is normal.
Why does my LG washer show OE?
It cannot drain. A clogged drain pump filter or a kinked or blocked drain hose is the usual cause.
Can I keep using my LG washer with an error code showing?
If the code clears after a reset and does not return, yes. For FE, LE or CE, stop using the washer and call a technician.
LG washer showing an error? We’ll sort it out.
Call (601) 419-6599 for a written price before any work starts. 2624 Lincoln Rd, Hattiesburg, MS 39402. Monday to Saturday, 8 a.m. to 6 p.m. Request service for your LG washer today.