Kenmore Washer Repair in Hattiesburg, MS

Kenmore washers have been built by different makers over the years. The model number tells us which parts apply.

Short answer

We repair Kenmore top-load and front-load washers at your home in Hattiesburg. Kenmore is a store brand, so the washer inside may come from a different maker depending on the year, and the model number tells us which parts to expect. The service call is $75, and you get a written price before work starts.

Why does the Kenmore model number matter?

Kenmore has been built by several manufacturers over the years, so two Kenmore washers can have very different insides. The first digits of the model number point to the maker, and that tells us which pump, lock or valve fits your washer. Find the label inside the lid or on the door frame.

SymptomCommon causeRead more
Will not drainPump, filter or hose blockageWasher won’t drain
Will not spinLid switch, belt, coupling or lockWasher won’t spin
Will not agitateAgitator dogs, coupling or beltAgitation problems
Noisy or shakingSuspension, bearings, unlevel floorNoisy washer
Door will not openDoor lock or latchDoor won’t open

Kenmore washer repair around Hattiesburg

Kenmore washers are common in older Hattiesburg homes and rentals, many of them well over ten years old. Age shows up as worn belts, couplings, suspension and seals. Many of these repairs are straightforward. Humid summers also bring mildew and lock problems on front-loaders, covered on our front-load page.

What does Kenmore washer repair cost?

The service call is $75, and you get a written price before we start. See the cost guide. On older machines we tell you honestly when a repair is not worth it.

Kenmore washers are made by different manufacturers

Kenmore is a brand name, not a single factory. Over the years, Kenmore washers have been built by Whirlpool, LG, Electrolux and others, so two Kenmore washers can have very different insides. The model number tells which company built yours. For example, many Kenmore numbers beginning with 110 were built by Whirlpool, while many beginning with 796 were built by LG. That is why finding the right part starts with the full model number, not the Kenmore name.

Why that matters for repair

A Kenmore top-loader built by Whirlpool may use the same lid switch, coupling and drain pump as a Whirlpool or Maytag. A Kenmore front-loader built by LG may share parts with LG machines. Knowing the builder lets a technician diagnose faster and source the right part.

SymptomCommonly involves
Will not drainDrain pump, filter or hose
Will not spinLid switch, coupling, belt or door lock
Loud noise during spinBearing, suspension or an object in the pump
LeaksHoses, door seal, pump or tub seal
Will not startLid switch, thermal fuse or control board

Before we arrive

Find the model and serial number on the label inside the lid or door frame or on the back of the cabinet, and take a photo if it is easier. Tell us what the washer is doing, and when it started. We will diagnose, explain the cause and quote before starting. See what washer repairs cost for typical ranges.

We are an independent repair company and are not affiliated with or authorized by the manufacturer. We service the washer in your home and quote the repair before starting.

Parts, model numbers and warranty

The most useful thing you can do before a Kenmore repair is to find the model and serial number. They tell us the exact version of the washer and let us order the correct part the first time. Our repairs come with a 30-day warranty. If the washer is still under the manufacturer’s warranty, check that first, because a manufacturer repair may cost nothing.

Should you repair or replace?

For most Kenmore washers under ten years old, a repair is cost-effective. For an older washer with a major failure, we will give you an honest recommendation. Our repair or replace guide explains how we think about the decision, and our repair cost guide gives typical ranges.

Care tips for Kenmore washers

  • Check the model number first, since cleaning steps and filter locations depend on who built the washer.
  • Use the correct detergent type for your washer, HE or standard.
  • Clean the drain filter or lint screen if your model has one.

Related brands and problems

We also repair Whirlpool and Maytag, GE and LG washers. See all Troubleshooting guides.

FAQ

Kenmore washer repair questions, answered

Do you repair Kenmore washers?

Yes. We repair Kenmore top-load and front-load washers at your home in Hattiesburg and nearby towns.

Who makes Kenmore washers?

Kenmore is a store brand, and different manufacturers have built Kenmore washers over the years. The model number tells us which.

Where is the model number on a Kenmore washer?

Inside the lid of a top-loader or on the door frame of a front-loader, on a label with the model and serial number.

Are parts available for older Kenmore washers?

Often yes, since many parts are shared with the maker’s own brands. We check before quoting.

Is it worth repairing an old Kenmore?

It depends on the fault and the price of parts. We give a written price first and tell you honestly if replacing is smarter.

Kenmore washer trouble? We’ll fix it.

Call (601) 419-6599 for a written price before any work starts. 2624 Lincoln Rd, Hattiesburg, MS 39402. Monday to Saturday, 8 a.m. to 6 p.m. Request service for Kenmore washer repair Hattiesburg today.