Whirlpool and Maytag Washer Repair in Hattiesburg, MS

Whirlpool, Maytag, Kenmore and Amana. We know these washers well and fix them at your home.

Short answer

We repair Whirlpool, Maytag, Kenmore and Amana washers in Hattiesburg and the Pine Belt at your home. Common faults are a worn motor coupling, a failed lid switch, a slipped belt or a clogged drain pump. The service call is $75, and you get a written price before any work starts.

Common Whirlpool and Maytag repair topics

Whirlpool owns Maytag, Kenmore Elite and Amana washers, which is why they share many parts and many faults. This is our usual short list.

What you noticeUsual causeTypical fix
Agitates but will not spinLid switch, motor coupling or drive beltTest the switch, then replace the worn part
Water will not drainClogged pump, hose or failed drain pumpClear it or replace the pump (details)
Slow or no fillTaps, inlet screens or inlet valveClean the screens or replace the valve
Loud knocking or walkingUnlevel washer, off-balance load or worn suspensionLevel it, rebalance, replace parts if worn
Door will not lock (front-loaders)Door lock or latchReplace the lock assembly
LeakingHose, pump or tub sealSee washer leaking water

Whirlpool and Maytag error codes

Many newer models show an F code followed by an E code. Models differ, so treat these as a starting point.

  • F9 E1 usually means the washer is taking too long to drain.
  • F8 E1 usually means it is taking too long to fill.
  • F5 codes often point to a door or lid lock problem.

Older models and some Maytag top-loaders flash lights instead of showing codes. Tell us the model number and what the lights do, and we can usually narrow it down by phone.

Why won’t my Maytag or Whirlpool washer spin?

If it agitates but the clothes stay soaking, the cause is usually the lid switch, the motor coupling or the belt. Coupling failure is especially common on direct-drive Whirlpool and Kenmore top-loaders, and it is a quick part to replace once diagnosed.

Is a Maytag or Whirlpool washer worth fixing?

Often yes. These machines have common parts that are easy to get, so repairs are usually fair in price. If the transmission or tub is shot on an older washer, we say so and help you decide.

What repair costs in Hattiesburg

The service call is $75, and most Whirlpool and Maytag repairs run about $120 to $325 with parts and labor, depending on the part. A written price comes before work starts. More on the cost page.

These brands in the Pine Belt

Whirlpool and Maytag are the workhorses of South Mississippi laundry rooms, from older homes in Midtown and Oak Grove to farmhouses out toward Purvis, Lumberton and Sumrall. We keep common couplings, belts, lid switches and pumps on the truck for these.

Reading your model number

Whirlpool, Maytag, Kenmore and Amana share parts, so the model number matters more than the badge. It is usually on a sticker on the back, inside the lid rim or in the door opening. A couple of minutes on the phone with that number lets us arrive with the right coupling, belt or switch. For other brands, see Samsung and LG.

A real top-load repair we did in Hattiesburg

A customer’s top-load washer started banging at spin speed and walking across the laundry room. They thought it was done. We checked the leveling, the suspension and the drum movement, found faulty suspension components, replaced them, rebalanced and leveled the washer and ran a spin test. Vibration dropped a lot. Read more on our top-load repair page.

Common mistakes with older Whirlpool and Maytag washers

  • Overloading, which wears couplings and suspension.
  • Ignoring a small leak, which becomes a rusted tub or a ruined floor. See washer leaking water.
  • Using too much detergent. See washer won’t drain for how soap slows the pump.

Where we repair them

These washers are everywhere in the Pine Belt, from older homes in Hattiesburg to farmhouses near Purvis, Lumberton, Sumrall and Laurel. See all areas we serve, check the price ranges, read the FAQ or call us.

What customers say

Convenient in-home washing machine repair

“Having a broken washing machine is stressful, especially when you have a busy household. I really appreciated being able to get professional repair service at home without having to transport the machine anywhere. The technician arrived with the necessary tools, inspected the washer, and handled the repair carefully. The whole experience was convenient, straightforward, and professional. I’ll definitely contact them again if I need appliance repair services.”

FAQ

Whirlpool and Maytag washer repair questions, answered

Why does my Whirlpool washer agitate but not spin?

A worn lid switch, motor coupling or drive belt is the usual reason. We test the switch first because it is simple and cheap, then check the drive parts.

What does F9 E1 mean on a Whirlpool washer?

F9 E1 usually means the washer took too long to drain. Check the drain hose and pump filter. If they are clear, the drain pump may have failed.

Do you repair Kenmore and Amana washers?

Yes. Kenmore Elite and Amana washers are often built by Whirlpool, so we can repair them too. Have the model number ready.

Is it worth repairing an old Maytag washer?

If the fault is a common part such as a lid switch, coupling or pump, usually yes. If the tub or transmission is badly worn, replacement may be better. We tell you honestly.

How much does Whirlpool or Maytag washer repair cost?

The service call is $75, and most repairs run about $120 to $325 with parts and labor. You get the price in writing first.

Do you service Maytag Centennial and Bravos washers?

Yes. We service Maytag Centennial, Bravos, Cabrio and other Whirlpool-built models. Tell us the model number when you call.

Whirlpool or Maytag giving you trouble? Call us.

Call (601) 419-6599 for a written price before any work starts. 2624 Lincoln Rd, Hattiesburg, MS 39402. Monday to Saturday, 8 a.m. to 6 p.m. Request service for Whirlpool washer repair Hattiesburg today.